Indoor Gold Cons Cleanup - Winter Fun, wheeeeee! |
Indoor Gold Cons Cleanup - Winter Fun, wheeeeee! |
Jan 31 2010, 10:11 AM
Post
#1
|
|
Moderator Group: Members Posts: 4,459 Joined: 25-August 09 From: way on up thar Member No.: 6,983 |
I did some cleanup yesterday and thought I'd share some pics.
I plan on adding a recirculating cleanup sluice to the system (probably the new Keene Super Recirc.) this spring for the #20+ mesh stuff.... for now I'm panning that. Mesh #30 and smaller go into the Blue Bowl . I ran two separate batches of concentrate through the system, both from our very own CP! Each were 2lb dry bags. The first was concentrate was sent by Dan & Denise from the shavings and grindings (panning sample) included in the incredible gold/quartz cab that I won in the CP drawing (1st item down): CP Stash The second 2lb cons bag that I ran through was a special bag that Dan & Denise put together (which I requested) for Colorado gold (to be included in a project I'm working on). I am very grateful, exactly what I needed. If you've got the cabin fever or just want to stay sharp with your cleanup techniques I highly recommend picking up some CP cons and gettin' busy. Me.... I'm still learnin'. I had a blast! Here's how it went: My indoor system is very tidy. As you can see I'm setting up shop on my nice area rug with no worries. Well, that and.... since my last girlfriend moved out there are no more rules here . I'll also be wearing a tuxedo during the entire process (the umbrella in the pic is for camera lighting) Some of my cleanup tools: This is my basic recirculating setup The 36 gal Rubbermaid tub contains all of the splashback. I'll be attaching the spray nozzle (for rinsing classifying screens, etc.) and the Blue Bowl to the end of the recirc hose for each process. This is the first stack of screens - #2 mesh down to #30. Since I know I have a tendency to get these screens mixed up (and the magic marker will eventually wear off) I've taken the liberty of burning the mesh numbers into each screen rim with a rounded attachment on my woobuning tool. Dirt Rinsing it down trough the stack one screen at a time Starting to see colors in the #20 mesh #20 - #2 mesh goes to the pan. Here's the #30 mesh and smaller that went to the bottom of the bucket. It will be classified in the next stack of screens: Next stack of screens #30 - #100. Each mesh class will be Blue-Bowled separately at different speeds. continued.... -------------------- /l ,[____], l---L-OlllllllO- ()_) ()_)--o-)_) BLACK SANDS MATTER! Very Happy CP Lifetime Member CP CORE TEAM Referral Code CE213 |
|
|
Oct 7 2014, 07:03 AM
Post
#2
|
|
Rock Bar! Group: Members Posts: 496 Joined: 15-January 13 Member No.: 52,528 |
When I get down to the -100 cons I run the bowl really slow for a few minutes, roughly 1 1/2 down from the lip. That slowly pulls the light blondes off the top, then I stop the flow and spread out what has built up around the cone and push it to the outside. I keep doing that while slowly ramping up the speed until all I can see is a little bit of black sand left. I'll pan that slowly and watch for color trying to move with the black sand. The hard part is getting it out of the pan, I have an insulin syringe that I filed the point off of that works pretty good, but I have to check the rubber piece inside because the gold loves to stick to it. It really is more trouble than it's worth for the super fine stuff, Chris is right that most of the gold is 50+ up there from what I've seen in both of my cleanups.
-------------------- Life goes by so fast/You only wanna do what you think is right/Close your eyes and it's past/Story of my life - Mike Ness
|
|
|
Lo-Fi Version | Time is now: 10th November 2024 - 10:55 AM |