Making first miller table Options

[burrell]

I'm starting to put together material for a aluminum miller table. What i would like to do is glue the Alu together. I've talked with some of my airplane friends and they came up with methacrylate 7350 a Parsons product which is suppose to be self etching. Small amounts of this stuff is hard to come by because of short shelf life. I plan to use Jasco prep&prime(need input)on the glued surfaces regaurdless of what ever adhesive i use. 5200 may work and i've used a lot of it in a marine environment and also glued some of Jens favorite shoe soles(doesn't take much) back together with it.I'm just concerned with the Alu oxidizing and coming a part at the glue seam (not nice). I really don't want to put fasteners in the bed of the table if possible. Any in put good or bad i will appreciate. The metal is on the way and should be here next week. Ordered by phone from discountsteel.com (Fort Worth Tx) for a better price than on line. It beats spending a day driving to Tallahassee and not ending up with what i need. In put on bed surface also, bondo autmotive primer chaulk board paint ect. Later i'll need some help with the math on the spray bar but that can wait. I'm going to keep for anyone relatively neat notes and drawings on this if it turns out well.
Burrell

[CP]

Sounds like the project is coming along very nicely Burrell. We'd love to see some pics of you guy's equipment and this particular forum is quite easy to upload pictures too.
Just below the box you type the replies into you'll see an attatchment editor, that's where you upload pics.
First you will click on the browse tab which opens up a box to find the pic file on your computer, once you've located and choosen the appropriate file, then click the open tab on that box. When the little box closes you will still need to click on the upload link to then actually upload the file into the forum that you've just choosen.
At this point the forum will resize the pic if needed and attatch it to the end of your post when you click add reply. Or you can manually place the pics into the text box and arrange them with descriptions if you wish to add more than one pic per post.

Hope that helps with the pic upload and attatching. Give it a shot and let us know if you have questions.