Son of Green Machine, drive end |
Colorado Prospector - Gem and mineral prospecting and mining forums > Prospecting, Mineral Collecting and Treasure Hunting Forums > Equipment - Prospecting and Lapidary  |
Son of Green Machine, drive end |
 May 25 2004, 03:53 AM
Post
#1
|
|
|
Diggin' In!  Group: Members Posts: 45 Joined: 8-October 03 Member No.: 6  |
yes its a 160volt d/c motor and close coupled gearbox and is variable between 0 and 100 revs per min. The barrel will turn at 35--40 revs this seems to be a good speed depending on the amount of clay--- where the clamp is in the pic there will be a turn screw with a spring to keep the wheels pressured on the barrel so if any thing jams the barrel the wheels will slip --- no breakages in the field lol voice of experience there grin
Attached image(s)
|
 |
 
|
|
| Lo-Fi Version | Time is now: 29th April 2024 - 07:02 AM |
