Red Dog Fabrication Channel on YouTube Options

[amorton]

Hello everyone,

Thought I would share my new YouTube channel. I have a few videos up and will be uploading more as I make them and can get them edited down and uploaded. I am concentrating the channel on self sufficient living DIY projects and touching on the prepping movement. I dont want to put myself in any one category because along with my planned topics I will be putting up mining videos and anything else I can share that might be of usefulness to any one willing to listen. some of the videos are a little long but I think there is and will be some valuable information in the videos to come. I also plan on using this channel so showcase some products I will be making in the feature, but for now I just want to share what I am doing.

http://www.youtube.com/channel/UC-21QlLRnv...phLdKGoA/videos

Thanks Andrew

[amorton]

OK Chris, I only had time to put this simple model together, just an idea I was playing with on paper last night and wanted to see it in 3D before I go to work. The top wheel would be your contact wheel with the contact plate below it. I am thinking just building the whole thing off a sold plate and only support the wheels from one side. Trying to get it as space conservative as possible. Bottom wheel is your tracking wheel and the obvious one with the spring is your tension pulley. This is just a quick visual nothing is to scale. I was watching Star Trek the return home "the one with the time travel to San Francisco and beaming whales" while building this so any resemblance to a Klingon bird of prey is just coincidence.

This by no means has to be your design but was just some ideas I had in my head last night.