Knife Making |
Knife Making |
Jun 28 2012, 09:40 PM
Post
#1
|
|
Moderator Group: Members Posts: 4,459 Joined: 25-August 09 From: way on up thar Member No.: 6,983 |
Time to learn something new. (I blame Woody for this)
I am going to build a custom knife... and hopefully many more after I get skilled enough. I've learned a lot through the internet and am ready to get started, I'll post my progress. Hopefully I won't screw it up too bad. So far.... I bought a fixed-handle knife blank. The overall length is 7" and the blade length is 3-1/4". It is 1/8" thick. Good steel - 440c with a hardness of 56-58 RC so it should hold an edge really well. This blade style is called "Western Skinner" and will make for a nice fish & bird knife when completed. While I'm waiting for parts... I decided to practice some decorative file-work today. I plan to incorporate something like this on the Skinner. This is a vine pattern that I practiced today on a piece of leaf-spring metal that Woody gave me (also 1/8" thick). I used several different needle-files to do this work. I'm ready to try it on the real thing. -------------------- /l ,[____], l---L-OlllllllO- ()_) ()_)--o-)_) BLACK SANDS MATTER! Very Happy CP Lifetime Member CP CORE TEAM Referral Code CE213 |
|
|
Aug 10 2012, 12:08 PM
Post
#2
|
|
Moderator Group: Members Posts: 4,459 Joined: 25-August 09 From: way on up thar Member No.: 6,983 |
I have a little time today so I've begun to hand-file a bevel on the Nessmuck. This may take some time. I'm not going to put a sharpening edge on it... that will be done AFTER heat treating, very important. My goal here is to equally establish my bevel on both sides of the profile. I'm going with a tall bevel on this knife to increase it's 'slicing' ability. A short bevel would lend itself more to a 'chopping' edge.
-------------------- /l ,[____], l---L-OlllllllO- ()_) ()_)--o-)_) BLACK SANDS MATTER! Very Happy CP Lifetime Member CP CORE TEAM Referral Code CE213 |
|
|
Lo-Fi Version | Time is now: 26th September 2024 - 08:57 AM |