Knife Making |
Knife Making |
Jun 28 2012, 09:40 PM
Post
#1
|
|
Moderator Group: Members Posts: 4,459 Joined: 25-August 09 From: way on up thar Member No.: 6,983 |
Time to learn something new. (I blame Woody for this)
I am going to build a custom knife... and hopefully many more after I get skilled enough. I've learned a lot through the internet and am ready to get started, I'll post my progress. Hopefully I won't screw it up too bad. So far.... I bought a fixed-handle knife blank. The overall length is 7" and the blade length is 3-1/4". It is 1/8" thick. Good steel - 440c with a hardness of 56-58 RC so it should hold an edge really well. This blade style is called "Western Skinner" and will make for a nice fish & bird knife when completed. While I'm waiting for parts... I decided to practice some decorative file-work today. I plan to incorporate something like this on the Skinner. This is a vine pattern that I practiced today on a piece of leaf-spring metal that Woody gave me (also 1/8" thick). I used several different needle-files to do this work. I'm ready to try it on the real thing. -------------------- /l ,[____], l---L-OlllllllO- ()_) ()_)--o-)_) BLACK SANDS MATTER! Very Happy CP Lifetime Member CP CORE TEAM Referral Code CE213 |
|
|
Aug 5 2012, 04:35 PM
Post
#2
|
|
Moderator Group: Members Posts: 4,459 Joined: 25-August 09 From: way on up thar Member No.: 6,983 |
I really wish I had more experience at this. My only experience is from when I was in high school 1979. I had both Metal and Wood Shop classes. We were allowed to do a combined shop project that year which was "Make A Knife". We crafted the blade (full tang) in Metal Shop, then the next hour was Wood Shop where we did handle work. I really got into that project and got an A after turning in my knife... which somehow got stolen from the Shop locker!!! After those long hours of crafting that knife as teenager, then to have it ripped off, I thought I was cured of knifemaking forever and went back to crafting marijuana pipes when the teacher wasn't looking. Needless to say, I plum forgot everything about how to "Make A Knife". I doubt any Shop classes in the country offer knifemaking classes anymore, lol... hell we were making and wearing hunting knives in school, gun racks in trucks. Lucky to live in that more innocent time and a small rural community as a kid. Now that my interest has been rekindled by Woody's gift of a Machete... I dove in a bit and used the internet to learn, which is a tremendous resource as you know. I made plenty of mistakes on that one with the vine pattern but managed to back-track and fix them as I went along (I think this is known as the "Texas Two-Step" ). What should have been a fast build took forever and that's ok.. have to put my hands on all the burners. I was really super careful with the folding knife and that one turned out well. The large skinner that I made is far from flawless in my mind. I had problems squaring the bolsters and if I look hard I see much room for improvement on that one. I'm getting better now but will continue to make mistakes for sure. As a beginner I can testify again that it can be done by anyone with patience and determination with minimal tools or investment. I got a little 'artsy' with the vine thing but it's not a necessary skill for making a quality knife. You should try it Jim! Making them from blanks is fun and easy and I already know that you are an exceptionally talented artist with attention to detail and an eye for beauty. Your works don't lie and I have a guitar pick here to prove it! I might turn out to be a flop at stock removal but I have to try it. Steel shaping is a much different animal than what I've been doing thus far. -------------------- /l ,[____], l---L-OlllllllO- ()_) ()_)--o-)_) BLACK SANDS MATTER! Very Happy CP Lifetime Member CP CORE TEAM Referral Code CE213 |
|
|
Lo-Fi Version | Time is now: 23rd September 2024 - 09:26 AM |