Scott's Rock Shop Options

[ScottKS]

Here is some pictures of my rock shop in progress.....these pics are the before am still decideing if i want to set it all back up because everything in the boxes in that cornor use to be on those shelfs on the wall....as u can see dad has his lil chopper still in there and that is a hazard hopefully we will get that out this weekend so i will have more room to play with....the last pic is a pic of my lapidary or (PDQ as it says on the front....not sure yet what that stands for but it is a lil table top lapidary) right now it is setup for faceting (without the disk in the platform) and drilling right below that on the left side and a lil polishing wheel on the left and then the trim saw on the right on the motor. This is just the begining........there will be more

Attached image(s)

 

[ScottKS]

Here is my next projects #6-#10.......#1 2nd attempt on Banded Agate 15x20mm oval ......#2 Amethyst 12.74x20.34mm oval......#3 Kansas Pop Rock 11.64x16.50mm oval........#4 Fire Agate 9.86x11.97mm oval.........and #5 Honey Onyx 8x10mm oval. 4 and 5 i'm about the dop, could fly off ......will just have to see what happens..... #'s 2,3 and 4 are cabs that granny or grandps started but didn't finish. I also will be tryin the M5 polish that is on the way right now....hope i will get it by tomarrow

P.S. all the exact measurements are as of right now.....will see what the finish sizes will be.....the other 2 are the patern measurements.

Attached image(s)